FTTH Wall Mounted Hook Clamp

The C-type hook is installed on the outer wall of the building with screws, and is used for the connection and fixation of the S fixing parts. The installation apertures of the c-type hook are 6mm and 8mm respectively, and expansion plugs are required.

  Свяжитесь с нами
Подробная информация о продукте

The c-type hook is used as an accessory for outdoor or indoor wall fiber access. The main purpose is to form an anchor on the wall for the erection and support of the fiber. The hanging part rotates more than 180 degrees, so the wire body It can only be detached manually, and the thread body will not decouple even in a strong wind environment. 

C-type hook specifications: length 7cm, width: 2.7cm, thickness: 4mm, the surface is hot-dip galvanized, and the groove and base are fixed by riveting.

Installation image: 

FTTH Wall Mounted Cable Wire Clamp,C Type Wall Mounted Drop Cable Clamp,C Type Wall Mounted Hook Clamp

How to use c-type hook: 

1.Take a marker pen, stick the c-shaped hook on the wall, and place the marker in the screw hole of the c-shaped hook to make a mark. 

2.Choose the size of the drill hole according to the hole diameter of the c-type hook screw hole. 

3.Use a percussion drill to align the holes with the marked points, put the expansion plug into the appropriate depth, put on the c-shaped hook and fasten it with the quick screw. 

4.After tightening, the force reaches 15 Newtons, which far exceeds the standard of using force.


Форма продукта